WhatsApp：+86-15852418534
PRODUCTS
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
XAR500 is a special structure steel plate, with very high wear resistance, in general, the higher the hardness, the higher the wear resistance of the corresponding steel plate, wear-resistant special structure steel plate XAR500 is usually quenched or quenched and tempered, with excellent martensitic or martensitic-bainite structure.
XAR450(1.8722) wear plate is a special structural steel with high wear resistance produced by ThyssenKrupp Steel plant in Germany, generally speaking, the higher the hardness, the higher the wear resistance. The average hardness of this wear-resistant special mechanism steel is 450HB, and after quenching or quenching and tempering, it has a good martensitic-bainite microstructure.
QUARD600 is a wear-resistant steel plate. It has a high hardness, a hardness value of up to 600HBW, is generally used in extremely severe wear occasions, can be used to replace cast steel, chromium alloy cast iron and surface hardening metal.
XAR400 wear-resistant plate main application: Construction machinery: cement pusher tooth plate, concrete mixing building, mixer lining plate, dust collector lining plate, brickmaking machine mold plate Engineering machinery: loader, bulldozer, excavator bucket plate, side edge plate, bucket bottom plate, blade, rotary drilling rig drill rod
Quard is a wear-resistant plate designed to resist wear and tear in earth moving, construction, mining, quarrying and recycling industrial applications. The durability of the Quard makes it an ideal choice for large machinery in demanding environments.
2036 aluminum this is an early application of a kind of hard aluminum, commonly known as standard hard aluminum, with moderate strength, annealing, quenching and hot state plasticity is good, heat treatment can be strengthened, quenching and natural aging state in use, spot welding weldability is good.
2036 aluminum alloy features: high strength, a certain heat resistance, can be used for working parts below 150℃.
The strength of 2036 alloy is higher than that of 7075 alloy.
2036 aluminum alloy features: high strength, a certain heat resistance, can be used for working parts below 150℃.
The strength of 2036 alloy is higher than that of 7075 alloy.
1100 aluminum alloy is 99.0% ordinary industrial pure aluminum.
Heat treatment can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance;
After anodic oxidation, the corrosion resistance can be further improved and a beautiful surface can be obtained.
Heat treatment can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance;
After anodic oxidation, the corrosion resistance can be further improved and a beautiful surface can be obtained.
1070 aluminum has high plasticity, corrosion resistance, electrical conductivity and good thermal conductivity, but low strength, not through heat treatment to strengthen, cutting is not good, can accept contact welding, gas welding.
Make use of its advantages to manufacture some structural parts with specific performance, such as aluminum foil gaskets and capacitors, electronic tube isolation net, wire, cable protection sleeve, net, wire core and aircraft ventilation system parts and decorative parts.
Make use of its advantages to manufacture some structural parts with specific performance, such as aluminum foil gaskets and capacitors, electronic tube isolation net, wire, cable protection sleeve, net, wire core and aircraft ventilation system parts and decorative parts.
1100 aluminum alloy is 99.0% ordinary industrial pure aluminum.
Heat treatment can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance;
After anodic oxidation, the corrosion resistance can be further improved and a beautiful surface can be obtained.
Heat treatment can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance;
After anodic oxidation, the corrosion resistance can be further improved and a beautiful surface can be obtained.
The main alloying elements in 6061 alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect.
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
2036 aluminum this is an early application of a kind of hard aluminum, commonly known as standard hard aluminum, with moderate strength, annealing, quenching and hot state plasticity is good, heat treatment can be strengthened, quenching and natural aging state in use, spot welding weldability is good.
2036 aluminum alloy features: high strength, a certain heat resistance, can be used for working parts below 150℃.
The strength of 2036 alloy is higher than that of 7075 alloy.
2036 aluminum alloy features: high strength, a certain heat resistance, can be used for working parts below 150℃.
The strength of 2036 alloy is higher than that of 7075 alloy.
6082 is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
CONTACT US
Tel : +86-15852418534
WhatsApp : +86-15852418534
Wechat : 15852418534
Email : sales16@hbiswugangsteel.com
GET A FREE QUOTE
Copyright : Wugang Steel Group Co., Ltd
