What is the production process of stainless steel plates?

2024-01-17

Stainless steel plate is a metal plate with corrosion resistance and high temperature resistance. It is widely used in construction, chemical industry, electric power, aviation and other fields. The following is the production process of stainless steel plates.

How are stainless steel pipes classified?

2024-01-17

Stainless steel pipes are divided into ordinary carbon steel pipes, high-quality carbon structural steel pipes, alloy structural pipes, alloy steel pipes, bearing steel pipes, stainless steel pipes, as well as bimetallic composite pipes, coated and coated pipes to save precious metals and meet special requirements. There are various types and uses of stainless steel pipes, with varying technical requirements and production methods. The current production of steel pipes has an outer diameter range of 0.1-450mm and a wall thickness range of 0.01-250mm. To distinguish its characteristics, steel pipes are usually classified according to the following method.

How to store corrugated boards?

2024-01-17

Stacking method: Corrugated boards should be stored flat and should not be stacked too high to avoid deformation or damage caused by excessive pressure. When stacking, care should be taken to avoid direct contact with sharp objects or heavy objects.

Preparation method of carbon steel pipe

2024-01-17

The raw material of carbon steel pipe is round tube blank, which needs to be cut and processed by a cutting machine to form a billet with a length of about 1 meter, and then sent to the furnace for heating through a conveyor belt. The billet is fed into the furnace for heating, with a temperature of approximately 1200 degrees Celsius.

What is the material of carbon steel plate and what are its advantages and disadvantages

2024-01-17

It is a type of steel with a carbon content lower than 2.11% and without intentionally adding metallic elements, and can also be called plain carbon steel or carbon steel. In addition to carbon, it also contains a small amount of elements such as silicon, manganese, sulfur, and phosphorus inside. The higher the carbon content, the better the hardness and strength, but the lower the plasticity.

What are the inspection standards for color coated rolls

2024-01-17

Inspect the appearance of the color coated roll, including the smoothness, color, and absence of obvious scratches, dents, bubbles, foreign objects, etc. on the coating surface. The appearance requirements should meet the product specifications and relevant national standards.

< 12 >