How to store corrugated boards?

release time:

2022-09-16 15:34

source:

Corrugated board is a commonly used packaging material. When storing, you need to pay attention to the following points:

1. Storage environment: Corrugated boards should be stored in a dry and ventilated environment to avoid moisture, mold or contamination by other substances.

2. Stacking method: Corrugated boards should be stored flat and should not be stacked too high to avoid deformation or damage caused by excessive pressure. When stacking, care should be taken to avoid direct contact with sharp objects or heavy objects.

3. Avoid exposure to the sun and rain: Corrugated boards are not resistant to ultraviolet rays and moisture, so they should avoid being exposed to direct sunlight for a long time or getting wet by rain.

4. Appropriate temperature: The ideal storage temperature for corrugated board is 15-25 degrees Celsius. Avoid exposure to extreme temperatures to avoid affecting its quality and performance.

5. Prevent moisture: If the corrugated board gets damp during storage, it should be dried or dried in time to ensure it is dry before use.

6. Regular inspection: Regularly inspect the stored corrugated boards to ensure that they are intact. If any damage or deformation is found, they should be replaced or repaired in time.

7. Insect-proof and rodent-proof: Corrugated boards are easily infested by insects and rodents, so corresponding measures should be taken, such as using insect repellents or setting up mousetraps, to keep the storage environment clean and hygienic.

In short, correct storage methods can ensure that the quality and performance of corrugated boards are not damaged and extend their service life. At the same time, it can also reduce the waste of resources and improve packaging efficiency. Therefore, when storing corrugated boards, you need to pay attention to the above points and operate according to the specific conditions.

Stainless steel plate is a metal plate with corrosion resistance and high temperature resistance. It is widely used in construction, chemical industry, electric power, aviation and other fields. The following is the production process of stainless steel plates.

Characteristics of copper pipes

Lightweight, with good thermal conductivity and high low-temperature strength. Commonly used in the manufacturing of heat exchange equipment (such as condensers). It is also used for assembling low-temperature pipelines in oxygen production equipment. Copper pipes with small diameters are commonly used for conveying pressurized liquids (such as lubrication systems, oil pressure systems, etc.) and as pressure measuring pipes for instruments.